Canon PIXMA MP560 Wireless Setup

PIXMA MP560 Wireless Connection Setup

PIXMA MP560 is a Wireless Inkjet All-In-One Photo Compact printer with high performance, built-in Wireless and Auto Duplex Printing. The PIXMA MP560 lets you do your job perfectly because it combines performance and convenience. With built-in double-sided printing so you can work more efficiently and save paper. The PIXMA MP560 type printer allows you to print easily from anywhere around the house and is supported Print Resolution (Up to) Black: 600 x 600 dpi & Color: excellent 9600 x 2400 dpi with a minimum color drop size of 1pl and an individual 5 ink tank system. This printer also has a new Auto Photo Fix II feature which helps to automatically correct your photos and you can preview the images before you print on the built-in 2.0 LCD. You can print beautiful, borderless photos up to 8.5 x 11 and clean, clear documents and enjoy exceptional quality.

To use this type of printer, you need to complete the Canon PIXMA MP560 Setup and after that you can enjoy using the printing services offered by Canon. To make it easier for you to work with this printer, you need to complete the Canon PIXMA MP560 Setup for your device. So read on and find out how you can complete printer setup for your device.

1. Get recommendations on how to set up a wi-fi connection on the PIXMA MP560 printer and also how you can reset the printer to the factory unit configuration.
2. Some entry points, often referred to as routers or hubs, have an aspect of an auto-link button labeled "WPS" which means your Wi-Fi Protected Settings.
3. This allows your authorized devices such as the PIXMA MP560 to connect to the network without having to enter a password, this will allow a quick and easy technique to combine your products.
4. With this Method you need no doubt as it is the best way to connect your PIXMA MP560, if your accessibility position includes a WPS button, select the 'WPS Connection Method' tab below for instructions on how to connect using this method.
5. If your router supports WPS, we have been offered a choice of directions to receive your PIXMA MP560 link, so make sure you select the 'Standard Connection Methods' tab below.

PIXMA MP560 Wireless WPS Connection Method

Before you begin, there are a number of conditions that must be met in order to use the WPS push button method:

1. Ensure that the access position must have a very visible physical WPS force button. Please check with your device user manual for details. If the WPS push button is not available then use the instructions on the Standard Connection Methods tab.
2. Your network must use the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most of the access points are WPS capable to use this protocol.

Step 1

• Make sure your printer is turned on.
• Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.

Step 2

• Make sure the light next to this button starts blinking blue then go to your access point and press the [WPS] button within 2 minutes.
• For more exact details on starting WPS on your access point then refer to its user manual.
• The Wi-Fi light (blue) on the printer will keep blinking during search and then the power and Wi-Fi lights will blink when connecting to the access point.
• When your printer has successfully established a connection to the wireless network, the power and Wi-Fi light will stop blinking and stay on.

We hope that these simple steps will make it easier for you to connect the Canon MP560 to WiFi to print your documents. Make sure you follow each of our preferred guidelines carefully to avoid technical problems in the process. Once you've done our preferred setup, you can print the document any time you want to use your canon printer. If you still have any doubts about our Canon MP560 WiFi Setup, we advise you to get in touch with a Canon printer expert then you have expert information to get it done quickly.