Canon PIXMA MX532 Wireless Setup

Canon PIXMA MX532 Wireless All-In-One Printer with Copier and Scanner Setup

PIXMA MX532 Wireless Office All-in-One is the perfect printer for those of you who travel a lot, it offers many handy features such as PIXMA Printing Solutions (PPS) which allows you to print, scan photos and documents from your compatible mobile device. Has a PPS Cloud printing function You can print directly from certain popular online Cloud services such as Flickr, Dropbox, Facebook, Twitter and Picasa Web Albums with your mobile device using the free PPS application. Additional Features include Auto Duplex printing which allows you to print on both sides of the paper automatically and can help reduce paper cost usage by up to 50%. In addition, the automatic document feeder holds up to 30 sheets making it easier to copy, scan or fax multi-page documents. This PIXMA MX532 Wireless also has a Color Print Resolution of Up to 4800 x 1200 dpi & Black Up to 600 x 600 dpi, Photo Print Speed ​​of 4 x 6 Without a Frame About 46 seconds, Color Print Speed ​​ESAT Approx 5.5 ipm & ESAT Black Around 9.7 ipm.

To use this type of printer, you must complete the Canon PIXMA MX532 Setup and after that you can enjoy using the printing services offered by Canon. To make it easier for you to work with this printer, you must complete Canon PIXMA MX532 Setup for your device. So read on and find out how you can complete printer setup for your device.

Canon PIXMA MX532 Setup

1. First, Place the Pixma MX532 case on a flat surface. Then Cut the sealing tape.
2. Then Pull the cover back, and take the contents out of the box. This includes the power cord, setup guide, ink cartridges, software CD, and interface cable.
3. Then Place the MX532 printer on a surface and make sure the surface is flat.
4. Then remove all tapes attached to the MX532 printer and throw it away.
5. Then Lower the front door and open the ink cartridge access door as well.
6. Then Grab the front tray slot and pull out the piece of cardboard that is stuck to the tape.
7. Then Close the ink cartridge access cover. And Unplug the power cord.
8. Then Plug it into the rear power port of the MX532 printer.
9. Then Plug the other end into a power outlet.
10. then Press the 'Power' button located on the left side of the control panel.
11. then Select the language using the arrow keys and press OK to confirm.
12. Then Printer MG532 prompts you to install the ink cartridges. And Lower the ink cartridge access cap.
13. Then Push the black ink cartridge lever down until it clicks into place.
14. Then Remove the protective tape from the black ink cartridge.
15. Then Install the Canon black ink cartridge by lining its projection with the groove in its slot and sliding it in.
16. then Flip the black cartridge lever up until it snaps into place.
17. Then repeat these steps to install the color cartridge. And Close the ink cartridge access cover.
18. kmmedian The MX532 printer processes the ink cartridges that have been installed.
19. Finally, Follow the instructions displayed on the MX532 machine control panel to complete the setup.

Canon PIXMA MX532 Wifi Setup

1. First, turn on your Pixma MX532 printer.
2. Then start the machine by tapping one of the buttons in the 4 button grid layout next to the Power button.
3. Then Wait until 'Copy 100%' appears on the screen. And Tap on Settings button.
4. Then When 'Wireless LAN Settings' appears, tap OK.
5. then Press Stop.
6. When you see the 'Default Settings' option on the screen, then press the right arrow key repeatedly until 'More settings' appears. then Press OK.
7. Then press the right arrow button to highlight 'Wireless settings' and then press OK.
8. Then run the MX532 installer on your computer. Then Click the Next button.
9. Then When the connection screen appears, select the one above which is Wireless Connection. Then Click Next.
10. Then Click 'Connect to network' and click Next on the following two screens.
11. Then Choose another method -> Wireless settings -> Next -> Next.
12. Finally, Select the software package to install and follow the rest of the instructions to complete the connection.

How To Scan On Canon PIXMA MX532

1. First, use the Auto Scan feature of your Canon printer software to scan items on your MX532 easily.
2. Then note that photos with very light backgrounds, and documents that are too thin or too thick, handwritten items, etc., will not scan properly. And you need to change crop frame for correct scan.
3. Then load the single sheet document face down on the scanner glass of your MX532 printer.
4. Then In the case of a multi-sheet document, then load it face-up in the ADF.
5. Then double click the Canon IJ Scan Utility icon to open it on your computer.
6. Then Click the Settings button to change the scanning preferences according to the document being scanned. And Save preferences.
7. Then Click any scan preset, such as Photo, Document, or Sew.
8. Finally, Documents/photos will be scanned according to the preferences you set.

Canon PIXMA MX532 Wireless Assistance

Click on the specific topic below to get detail information

Initial Setup

Download Windows

Download Mac

Setting up additional computers

Download Windows

Download Mac

Re-establishing Printer Connection After A Network Change

Download Windows

Download Mac

Need additional information or assistance

Download Search our KnowledgeBase

Download View available Drivers & Downloads

Download Go to Wireless Help Homepage

Apple Airprint

Download How to Print Using Apple AirPrint

Download Go to Wireless Help Homepage

We hope that these simple steps will make it easier for you to connect the Canon PIXMA MX532 to WiFi to print your documents. Make sure you follow each of our handpicked guidelines carefully to avoid technical problems in the process. Once you have completed our preferred setup, you can print the document whenever you want to use your canon printer. If you still have any doubts about our Canon PIXMA MX532 WiFi Setup, we are recommending you to contact a Canon printer expert, then you have expert information to solve it quickly.